Skip to main content
Fuse Resistors
首页/产品中心/Fuse Resistors
Fusible Resistor

Fuse Resistors

Dual-function fusible resistors that combine current limiting with overload protection — essential safety components for switching power supplies, battery systems and consumer electronics.

概述

概述

A fuse resistor (fusible resistor) is a safety-rated component that combines the functions of a resistor and an over-current fuse. Under normal operation, it provides a stable resistance value for current limiting, voltage division or in-rush protection. When the circuit experiences abnormal conditions — overcurrent, short circuit or surge — the resistor body opens like a fuse at preset conditions, providing fail-safe protection that prevents damage to downstream circuits and reduces safety hazards. The product is built with flame-retardant coatings and high-reliability materials for excellent thermal stability and safety performance. Widely used in safety-critical electronic circuits including switching power supplies (SMPS), adapters and chargers; home appliances (TVs, power strips, air conditioners, washing machines, etc.); industrial control equipment and power modules; LED drivers and power management; new-energy equipment (charging stations, battery management systems / BMS); instrumentation and telecom equipment.

主要特性

Dual-Function Design
  • Combines accurate resistance with fuse-style protection
  • Reduces component count and simplifies circuit design
High Safety
  • Rapid opening under fault conditions — prevents fire and rupture
  • Compliant with multiple safety standards
Excellent Surge Tolerance
  • Withstands transient surge currents
  • Suitable for power-input and inrush-protection circuits
Flame-Retardant & Robust Construction
  • Flame-retardant coating or ceramic encapsulation
  • Excellent heat- and fire-resistance performance
Strong Stability
  • Low TCR, stable resistance over long-term operation
  • Suitable for high-reliability applications
Wide Spec Variety
  • Custom power, resistance and fusing characteristics
  • Meets diverse application requirements
应用领域

典型应用

SMPS / Adapters
Home Appliances
Industrial Control
LED Drivers / Power Management
New-Energy Equipment
Instrumentation / Telecom
Fuse Resistors application scenarios

Fuse Resistors 型号对比

本系列各型号的并排规格对比 — 功率范围、阻值范围、精度、工作温度与典型应用。

规格项Custom Resistance金属膜保险丝电阻Custom Resistance氧化膜保险丝电阻Custom Resistance经典轴向保险丝电阻Custom Resistance经典编带保险丝电阻
产品名称保险丝电阻 / 管状保险丝保险丝电阻 / 管状保险丝保险丝电阻 / 管状保险丝保险丝电阻 / 管状保险丝
功率范围
阻值精度
色环
外形封装
工作温度
包装方式
适用标准
服务承诺
典型应用开关电源 / LED 驱动 / 适配器 / 家电控制 / 工业仪表开关电源 / LED 驱动 / 适配器 / 家电控制 / 工业仪表开关电源 / LED 驱动 / 适配器 / 家电控制 / 工业仪表开关电源 / LED 驱动 / 适配器 / 家电控制 / 工业仪表
阻值范围
电流范围2A ~ 40A(2A / 3A / 4A / 5A / 7A / 10A / 15A / 20A / 30A / 40A — 共 10 档)2A ~ 40A(2A / 3A / 4A / 5A / 7A / 10A / 15A / 20A / 30A / 40A — 共 10 档)2A ~ 40A(2A / 3A / 4A / 5A / 7A / 10A / 15A / 20A / 30A / 40A — 共 10 档)2A ~ 40A(2A / 3A / 4A / 5A / 7A / 10A / 15A / 20A / 30A / 40A — 共 10 档)
特性类型2F 快断型 / 2T 延时型2F 快断型 / 2T 延时型2F 快断型 / 2T 延时型2F 快断型 / 2T 延时型
端盖材料镀镍(或镀锡)黄铜镀镍(或镀锡)黄铜镀镍(或镀锡)黄铜镀镍(或镀锡)黄铜
本体材料透明玻璃管 / 陶瓷管(按系列)透明玻璃管 / 陶瓷管(按系列)透明玻璃管 / 陶瓷管(按系列)透明玻璃管 / 陶瓷管(按系列)
引线镀锡铜引线镀锡铜引线镀锡铜引线镀锡铜引线
熔断元件合金合金合金合金
涂层环氧树脂环氧树脂环氧树脂环氧树脂
本体尺寸Φ2.7 × 7.3 mm(公差 ±0.3 / ±1.0)Φ2.7 × 7.3 mm(公差 ±0.3 / ±1.0)Φ2.7 × 7.3 mm(公差 ±0.3 / ±1.0)Φ2.7 × 7.3 mm(公差 ±0.3 / ±1.0)
引线规格L 27 mm × Φ0.6 mm(公差 ±2.0)L 27 mm × Φ0.6 mm(公差 ±2.0)L 27 mm × Φ0.6 mm(公差 ±2.0)L 27 mm × Φ0.6 mm(公差 ±2.0)
引脚强度拉力 10N · 推力 2N · 弯曲 90° + 5N(持续 1 分钟)拉力 10N · 推力 2N · 弯曲 90° + 5N(持续 1 分钟)拉力 10N · 推力 2N · 弯曲 90° + 5N(持续 1 分钟)拉力 10N · 推力 2N · 弯曲 90° + 5N(持续 1 分钟)
查看详情查看详情 查看详情 查看详情 查看详情

常见问题

保险丝电阻和普通电阻加独立保险丝有什么区别?
保险丝电阻在一个元件中集成电流感应和过载保护 —— 持续过载时干净地断开为高阻状态,无电弧无火焰。可节省 PCB 空间、降低 BOM 成本,并确保故障切断元件始终与阻值匹配。典型应用:电源初级、电池单元检测、音频功放电源轨。
贵司的保险丝电阻具有什么时间-电流特性?
两种特性:快断型(F)在 4 倍额定功率下 1–10 秒断开,用于瞬态故障隔离;缓断型(T)可承受 5 倍额定功率 5 秒后再断开,适合浪涌电流。每条曲线均在数据手册中发布(对数-对数图)。对于关键任务设计,可提供三个测试电流下的实测断开时间。
保险丝电阻在正常工作中对浪涌电流的耐受能力如何?
缓断型(T)可承受单次脉冲浪涌至额定功率 20 倍持续 100 ms 不误断 —— 足够 100 W 电源中的电容浪涌。快断型(F)按设计不耐浪涌。我们按 IEC 61000-4-5(1.2/50 µs)表征浪涌耐量至 1 kV;每订单免费提供测试报告。
保险丝电阻可恢复吗,还是一次性器件?
一次性 —— 阻性元件断开后必须更换。这是有意设计:保险丝电阻必须可靠切断电源,而自恢复器件可能掩盖反复故障。需要复位功能的应用可考虑 PTC 热敏电阻或聚合物 PTC —— 我们可提供合适方案建议。
贵司的保险丝电阻有哪些封装和阻值范围?
轴向插装 1/4 W 至 5 W,阻值 0.1 Ω 至 100 kΩ;贴片 0805/1206/2010 从 1/8 W 至 1 W,阻值 1 Ω 至 10 kΩ。所有标准产品均符合 UL94 V-0 阻燃和 IEC 60127-7 保险丝电阻要求。定制阻值修整到 ±5%;订购时请同时注明稳态阻值和故障断开电流。
申请样品

申请样品

标准样品在合理数量内免费提供(2–3 个工作日内寄出)。定制样品 2–4 周内交付。请通过右侧表单告知我们:

  • 公司及联系方式
  • 目标型号或关键参数(功率 / 阻值 / 封装)
  • 应用场景及预计年用量
  • 收货地址及期望交付日期
📧 您也可以直接发邮件至 info@resistor-factory.cn / 13650089870
Inquiry

在线询价

PDF / STEP / DWG / ZIP / 图片 — 最多 3 个文件,每个 ≤ 5 MB

提交即表示您同意我们的 隐私政策